IBM Power7 8202-E4B (#7118) - Environmental Monitoring Probe</p><p>The Environmental Monitoring Probe (EMP) enables you to remotely monitor environmental conditions. Using a standard Web browser, you can view the ambient temperature and humidity of the remote environment, as well as the status of two additional contact devices, such as a smoke detector or open-door sensor. The temperature/humidity probe plugs into a RJ45 connector an a PDU+. The EMP can be used with any Powerware UPS equipped with a 10/100 Mb ConnectUPS Web/SNMP Card (firmware v3.01 or higher). The EMP can be located up to 20m (65.6 feet) away.</p><p>Attributes provided: Monitoring of temperature, humidity, and status of two contacts/ sensors. A one meter cat5 Ethernet cable, double sided velcro tape, two tie-wraps, and screw with wall anchor for mounting.</p><p>Attributes required: None</p><p>For 8202-E4B: (#7118)</p><p>Minimum required: 0</p><p>Maximum allowed: 9999 (Initial order maximum: 250)</p><p>OS level required: N/A</p><p>Initial Order/MES/Both/Supported: Both</p><p>CSU: Yes</p><p>Return parts MES: No</p><p>Note: Maximum support is 8x 7118 per 0553 rack and 8x 7118 per 0551 rack. Maximum of one 7118 per 7109 is supported.
