The IBM Power6 8203-E4A (#5096) PCI-X Exp Tower (no disk)</p><p>#5096 is an I/O expansion tower that has 14 PCI slots. It does not support disk units and does not support any internal removable media devices. A #5088 can not be mounted on a #5096. </p><p></p><p>One bus adapter to provide the RIO-2 interface to the system is required with each #5096. </p><p></p><p>One or two cables must be ordered to attach to the RIO-2 ports. Select the appropriate cable based on the cable length required. </p><p></p><p>The following RIO cables can be used with a #5096: </p><p></p><p>#3156 - 1.75m RIO-2 Cable </p><p>#3168 - 2.5m RIO-2 Cable </p><p>#3146 1m RIO-2 Cable </p><p>#3147 4m RIO-2 Cable </p><p>#3148 10m RIO-2 Cable </p><p>One of the following SPCN cables is required for each #5096: </p><p></p><p>#1466 30m SPCN Cable </p><p>#6001 2m SPCN Cable </p><p>#6006 3m SPCN Cable </p><p>#6007 15m SPCN Cable </p><p>#6008 6m SPCN Cable </p><p>#6029 30m SPCN Cable </p><p>No base IOP is included with the #5096. Each #5096 comes with redundant, hot-swap, power supplies. To enable further #5096 redundancy, dual line cord capability for the #5096 is provided by feature #5115. An additional #5096 line cord must be ordered when installing a #5115. Plugging in the second line cord, even if to the same outlet, enables the AC power modules to be redundant. </p><p></p><p>The following line cords are supported on a #5096: </p><p></p><p>#1399 - 4.3m 300V/16A </p><p>#1406 - 200V 16A 14-Ft TL Line Cord </p><p>#4655 - 4.3m 200V/16A Pwr Cd Italy </p><p>#1409 - 4.3m 200V/16A Pwr Cd AU/NZ </p><p>#1418 - 4.3m 200V/16A Pwr Cd S Afric </p><p>#1419 - 4.3m 200V/16A Pwr Cd Israel </p><p>#1420 - 4.3m 200V/16A Pwr Cd EU/Asia </p><p>#1421 - 4.3m 200V/16A Pwr Cd CH/DK </p><p>#1451 - 200V 6-Ft Line Cord </p><p>#1452 - 200V 14-Ft Line Cord </p><p>#1453 - 200V 6-Ft Locking Line Cord </p><p>#1454 - 200V 12A 14-Ft TL Line Cord (U.S. default) </p><p>#1455 - 200V 6-Ft Wtrtght Line Cord </p><p>#1456 - 200V 14-Ft Wtrtght Line Cord </p><p>#1476 - 4.3m 200V/12A Pwr Cd UK </p><p>Attributes provided: 14 PCI slots </p><p>Attributes required: RIO-2 connection </p><p>For 8203-E4A: The IBM Power6 8203-E4A (#5096) </p><p>Minimum required: 0 </p><p>Maximum allowed: 12 (Initial order maximum: 12) </p><p>OS level required: IBM i V5R4 with V5R4M5 Machine Code, or later. </p><p>Initial Order/MES/Both/Supported: Supported </p><p>CSU: Yes </p><p>Return parts MES: Does not apply
