IBM i Power 6, 8204 (#2962) 2-Port Multiprotocol PCI Adapter</p><p>This adapter provides high-speed connections between stand-alone system units on a WAN. To access WAN lines, the 2-Port Multiprotocol PCI Adapter connects via external communications equipment including Channel Service Units (CSU), Data Service Units (DSU), or through synchronous modems.</p><p>This adapter together with IBM AIXlink/X.25 provides a two-port connection to X.25 packet switched networks. IBM AIXlink/X.25 is a separately orderable LPP (5696-926).</p><p>2-Port Multiprotocol PCI Adapter with an appropriate cable is compatible with:</p><p>X.21 DCE - Using 2-Port Cable, X.21 IBM i Power 6, 8204 (#2954)</p><p>CCITT X.21 Signalling</p><p>CCITT V.11 Electrical</p><p>CCITT X.27 Electrical</p><p>EIA-422-A Electrical</p><p>ISO 4903 Connector for DCE side of an X.21 VHSI Modem Cable</p><p>V.24 DCE - Using 2-Port Cable, V.24/EIA-232 IBM i Power 6, 8204 (#2951)</p><p>CCITT V.24 Signalling</p><p>CCITT V.28 Electrical</p><p>CCITT X.21bis Electrical and Signalling</p><p>EIA-232-C Electrical and Signalling</p><p>ISO 2110 Connector for DCE side of an V.24 VHSI Modem Cable</p><p>V.35 DCE - Using 2-Port Cable, V.35 IBM i Power 6, 8204 (#2952)</p><p>CCITT V.35 Some signals for signalling</p><p>CCITT V.28 Some signals for electrical and signalling</p><p>ISO 2593 Connector for DCE side of an V.35 VHSI Modem Cable</p><p>V.36 DCE - Using 2-Port Cable, V.36/EIA-449 IBM i Power 6, 8204 (#2953)</p><p>CCITT V.10 Electrical</p><p>CCITT V.11 Electrical</p><p>Attributes provided: Two high speed WAN connections</p><p>Attributes required: One PCI slot</p><p>For 8204-E8A: IBM i Power 6, 8204 (#2962)</p><p>Minimum required: 0</p><p>Maximum allowed: 20 (Initial order maximum: 0)</p><p>OS level required: AIX 5.3 with the 5300-07 Technology Level or later. AIX 6.1 or later</p><p>Initial Order/MES/Both/Supported: Supported</p><p>CSU: Yes</p><p>Return parts MES: Does not apply</p><p>Note: Maximum of two allowed in CEC under AIX.</p><p>System maximum of 20 under AIX.</p><p>Not supported by IBM i or Linux.
