The IBM Power6 8203-E4A (#2962) 2-Port Multiprotocol PCI Adapter</p><p>This adapter provides high-speed connections between stand-alone system units on a WAN. To access WAN lines, the 2-Port Multiprotocol PCI Adapter connects via external communications equipment including Channel Service Units (CSU), Data Service Units (DSU), or through synchronous modems. </p><p></p><p>This adapter together with IBM AIXlink/X.25 provides a two-port connection to X.25 packet switched networks. IBM AIXlink/X.25 is a separately orderable LPP (5696-926). </p><p></p><p>2-Port Multiprotocol PCI Adapter with an appropriate cable is compatible with: </p><p></p><p>X.21 DCE - Using 2-Port Cable, X.21 The IBM Power6 8203-E4A (#2954) </p><p>CCITT X.21 Signalling </p><p>CCITT V.11 Electrical </p><p>CCITT X.27 Electrical </p><p>EIA-422-A Electrical </p><p>ISO 4903 Connector for DCE side of an X.21 VHSI Modem Cable </p><p>V.24 DCE - Using 2-Port Cable, V.24/EIA-232 The IBM Power6 8203-E4A (#2951) </p><p>CCITT V.24 Signalling </p><p>CCITT V.28 Electrical </p><p>CCITT X.21bis Electrical and Signalling </p><p>EIA-232-C Electrical and Signalling </p><p>ISO 2110 Connector for DCE side of an V.24 VHSI Modem Cable </p><p>V.35 DCE - Using 2-Port Cable, V.35 The IBM Power6 8203-E4A (#2952) </p><p>CCITT V.35 Some signals for signalling </p><p>CCITT V.28 Some signals for electrical and signalling </p><p>ISO 2593 Connector for DCE side of an V.35 VHSI Modem Cable </p><p>V.36 DCE - Using 2-Port Cable, V.36/EIA-449 The IBM Power6 8203-E4A (#2953) </p><p>CCITT V.10 Electrical </p><p>CCITT V.11 Electrical </p><p>Attributes provided: Two high speed WAN connections </p><p>Attributes required: One PCI slot </p><p>For 8203-E4A: The IBM Power6 8203-E4A (#2962) </p><p>Minimum required: 0 </p><p>Maximum allowed: 20 (Initial order maximum: 0) </p><p>OS level required: AIX 5.3 with the 5300-07 Technology Level or later. AIX 6.1 or later </p><p>Initial Order/MES/Both/Supported: Supported </p><p>CSU: Yes </p><p>Return parts MES: Does not apply </p><p>Note: Maximum of two allowed in CEC under AIX. </p><p></p><p>System maximum of 20 under AIX. </p><p></p><p>Not supported by IBM i or Linux. </p><p></p><p>
