<p>IBM Power7 8202-E4B (#5746) - HH 800GB LTO4 SAS Tape Drive</p>
<p> </p>
<p>(No Longer Available as of January 6, 2012)</p>
<p>The SAS Tape Drive uses industry standard Ultrium media. The Tape drive Write/Read Ultrium4 (LTO-4), Write/Read Ultrium3 (LTO-3), and Read Ultrium2 (LT02) formats. It has capacity of 800GB native or 1.6TB Compressed.</p>
<p>Highlights</p>
<p>Capacity: 800 GB native mode, 1.6 TB (typical) compression mode</p>
<p>Form Factor: 5.25-inch half high</p>
<p>Media: IBM Ultrium 4</p>
<p>Technology: Linear</p>
<p>Operation: Streaming</p>
<p>Data Transfer Rate: 120 MB/sec.</p>
<p>Speed matching down to 31 MB/sec with LTO-4 media</p>
<p>Interface: SAS</p>
<p>Compatability: LTO4 (R/W), LTO3 (R/W) and LTO2 (R)</p>
<p>Attributes provided: Feature includes one each of the following, HHLTO-4 SAS Tape Drive, LTO-4 Cleaning Cartridge, and LTO-4 Test Cartridge.</p>
<p>Attributes required: One 1.6-inch (41mm) half-high media bay is required and #3657 cable.</p>
<p>For 8202-E4B: (#5746)</p>
<p>Minimum required: 0</p>
<p>Maximum allowed: 1 (Initial order maximum: 1)</p>
<p>OS level required:</p>
<p>AIX Version 5.3 supported</p>
<p>AIX Version 6.1 supported</p>
<p>AIX Version 7.1 supported</p>
<p>IBM i 6.1 supported</p>
<p>IBM i 7.1 supported</p>
<p>SUSE Linux supported</p>
<p>Red Hat Linux supported</p>
<p>Refer to Software Requirements for specific O/S levels supported</p>
<p>Initial Order/MES/Both/Supported: Both</p>
<p>CSU: Yes</p>
<p>Return parts MES: No</p>
<p>Note:</p>
<p>#5647 required #3657 cable.</p>
