<p>IBM Power7 8202-E4B (#5619) - 80/160GB DAT160 SAS Tape Drive</p>
<p> </p>
<p>The Internal Tape Drive is a 5.25-inch, half-high for save/restore and archive functions. This DDS Gen6 tape drive uses the new larger IBM DAT160 and 4-mm data cartridges and is compression capable, providing a capacity of up to 160 GB (assuming 2:1 compression ratio) - a significant increase in capacity over the previous 36/72 GB 4-mm internal tape drives (when using DAT160 Data Cartridge)</p>
<p>Characteristics</p>
<p>Capacity: 80 GB native mode, 160 GB (typical) compression mode</p>
<p>DDS Gen6</p>
<p>Form Factor: 5.25-inch half high</p>
<p>Media: IBM DAT160 and 4mm media</p>
<p>Technology: Helical scan, rotating head</p>
<p>Operation: Streaming</p>
<p>Data Transfer Rate: 6MBps native mode,</p>
<p>Interface: SAS</p>
<p>Compatability: DDS4 (R/W), DAT72 (R/W) and DAT160 (R/W)</p>
<p>Attributes provided: Attributes provided: 4mm tape capability, Test Cartridge, and a Cleaning Cartridge</p>
<p>Attributes required: One 1.6-inch (41mm) half-high media</p>
<p>For 8202-E4B: (#5619)</p>
<p>Minimum required: 0</p>
<p>Maximum allowed: 1 (Initial order maximum: 1)</p>
<p>OS level required:</p>
<p>AIX Version 5.3 supported</p>
<p>AIX Version 6.1 supported</p>
<p>AIX Version 7.1 supported</p>
<p>IBM i 6.1 supported</p>
<p>IBM i 7.1 supported</p>
<p>SUSE Linux supported</p>
<p>Red Hat Linux supported</p>
<p>Refer to Software Requirements for specific O/S levels supported</p>
<p>Initial Order/MES/Both/Supported: Both</p>
<p>CSU: Yes</p>
<p>Return parts MES: No</p>
<p>Note:</p>
<p>Maximum of 1 supported in the CEC</p>
<p>Requires SAS cable group #3656 (SAS SFF)</p>
