IBM i Power 6, 8204 (#3708) 50GB 1/4-Inch Cartridge Tape</p><p>Mounted in a removable media device slot of a system unit or an expansion tower, these tape units may be used for save/restore, alternate IPL, program distribution, migration and 1/4-inch cartridge tape exchange.</p><p>Will READ/WRITE:</p><p>50GB (up to 100GB with compression in SLR100 format) with IBM SLR100-50GB Data Cartridge (35L0968)</p><p>30GB (up to 60GB with compression in SLR60 format) with IBM SLR60-30GB Data Cartridge (19P4209)</p><p>25GB (up to 50GB with compression in MLR3 format) with IBM MLR3-25GB Data Cartridge (59H4128)</p><p>5GB (up to 10GB with compression in SLR100 format) with IBM SLR100-5GB Data Cartridge (35L0661)</p><p>Will READ:</p><p>16GB (up to 32GB with compression in QIC5010 format) with IBM MLR1-16GB Data Cartridge (59H4175)</p><p>4GB (QIC4GB format) with SLR5-4GB data Cartridge (59H3660)</p><p>2GB (up to 4GB with compression in QIC5010 format) with IBM MLR1-2GB</p><p>Specifications for the primary recording format:</p><p>Cartridge Capacity (Native) = 50.0GB (1500-ft tape)</p><p>Cartridge Capacity (Compression) = 100.0GB (1500-ft tape)</p><p>Data Rate (Native) = 5.0MB/s</p><p>Data Rate (Compression) = 10.0MB/s</p><p>Attributes provided: 50GB 1/4-inch Cartridge Tape Device</p><p>Attributes required: Half-high removable media bay and a controller in place to interface to this media bay</p><p>For 8204-E8A: IBM i Power 6, 8204 (#3708)</p><p>Minimum required: 0</p><p>Maximum allowed: 18 (Initial order maximum: 0)</p><p>OS level required: IBM i V5R4 with V5R4M5 Machine Code, or later.</p><p>Initial Order/MES/Both/Supported: Supported</p><p>CSU: Yes</p><p>Return parts MES: Does not apply</p><p>Note: Not supported in CEC. System maximum of 18 under IBM i. Not supported under AIX or Linux.
