IBM i Series 8205-E6B (#3585) - 300 GB 15K RPM SCSI Disk Drive</p><p>The 300 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly provides 300 GB of storage capacity and supports the industry standard Ultra3 SCSI interface speed of up to 320 MBps.</p><p>Characteristics:</p><p>Form Factor: 3.5-inch, 1-inch (25 mm) high</p><p>Cable included: No</p><p>External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential)</p><p>Attachment Industry Spec: SCSI U320</p><p>Average Seek Time: 3.7 ms (based on four(4) READS to one(1) WRITE)</p><p>Average Latency: 2 ms</p><p>Rotational Speed: 15,000 RPM</p><p>Maximum Data Transfer Rate:107 MBps</p><p>Limitation: This disk drive requires attachment to a supported Ultra320 SCSI Adapter in a system that supports an Ultra320 SCSI cable/ backplane in order for the drive to run at 320 MBps. Also, any and all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3, or Ultra320 SCSI device(s) in order for this disk drive to run at 320 MBps.</p><p>Attributes provided: 300 GB of disk storage</p><p>Attributes required: one disk drive bay</p><p>For 8202-E4B: (#3585)</p><p>Minimum required: 0</p><p>Maximum allowed: 336 (Initial order maximum: 0)</p><p>OS level required:</p><p>AIX Version 5.3 supported</p><p>AIX Version 6.1 supported</p><p>AIX Version 7.1 supported</p><p>SUSE Linux supported</p><p>Red Hat Linux supported</p><p>Refer to Software Requirements for specific O/S levels supported</p><p>Initial Order/MES/Both/Supported: Supported</p><p>CSU: Yes</p><p>Return parts MES: Does not apply</p><p>Note:</p><p>Not supported in CEC.</p><p>System maximum of 336 in 14 x #5786
