<p>IBM Power7 8202-E4B (#5774) - 4 Gigabit PCI Express Dual Port Fibre Channel Adapter</p>
<p> </p>
<p>The 4 Gigabit Dual Port Fibre Channel Adapter is a 64-bit address/data, short form factor PCIe adapter with an LC type external fiber connector. With the use of appropriate optical fiber cabling, this adapter provides the capability for a network of high-speed local and remote located storage. The adapter will auto-negotiate for the highest data rate between adapter and an attaching device at 1 Gbps, 2 Gbps or 4 Gbps of which the device or switch is capable. Between the adapter and an attaching device or switch, the distances supported are up to: 500 meters running at 1 Gbps data rate, 300 meters running at 2 Gbps data rate, and 150 meters running at 4 Gbps data rate. When used with IBM Fibre Channel storage switches supporting long-wave optics, distances of up to 10 kilometers are capable running at either 1 Gbps, 2 Gbps, or 4 Gbps data rates.</p>
<p>The 4 Gigabit PCIe Dual Port Fibre Channel Adapter can be used to attach devices either directly, or by means of Fibre Channel Switches. If attaching a device or switch with a SC type fiber connector(s), use of an LC-SC 50 Micron Fiber Converter Cable (#2456) or a LC-SC 62.5 Micron Fiber Converter Cable (#2459) is required.</p>
<p>Refer to the following IBM storage subsystem Web page for additional supported server attachment information for IBM devices.</p>
<p>http://www.ibm.com/servers/storage/product/products_pseries.html</p>
<p>Consult with your IBM representative or Business Partner for additional information relative to any third party attachment.</p>
<p>Attributes provided: 2 Fibre Channel</p>
<p>Attributes required: 1 Empty PCIe slot</p>
<p>For 8202-E4B: (#5774)</p>
<p>Minimum required: 0</p>
<p>Maximum allowed: 24 (Initial order maximum: 24)</p>
<p>OS level required:</p>
<p>AIX Version 5.3 supported</p>
<p>AIX Version 6.1 supported</p>
<p>AIX Version 7.1 supported</p>
<p>IBM i 6.1 supported</p>
<p>IBM i 7.1 supported</p>
<p>SUSE Linux supported</p>
<p>Red Hat Linux supported</p>
<p>Refer to Software Requirements for specific O/S levels supported</p>
<p>Initial Order/MES/Both/Supported: Both</p>
<p>CSU: Yes</p>
<p>Return parts MES: No</p>
<p>Note:</p>
<p>Maximum of 4 in the CEC</p>
<p>System maximum of 24 -- 4 in CEC and 20 in 2 x #5802/ #5877</p>
