IBM i Power 6, 8204 (#5740) - 4-Port 10/100/1000 Base-TX PCI-X Adapter</p><p>The 4-Port 10/100/1000 Base -TX PCI-X adapter is a full height PCI-X 1.0a Ethernet adapter which supports four Gigabit ports on a single adapter, delivers increased bandwidth for slot-constrained servers, and is designed to provide high connectivity and reliability using two integrated, dual-port Gigabit Ethernet controllers.</p><p>Four RJ-45 ports</p><p>3.3 volts, 64-bit 133 MHz with 64-bit Bus Mastering on the PCI-X bus</p><p>IEEE 802.3ab 1000Base-T compliant</p><p>IEEE 802.3u 100Base-T compliant</p><p>IEEE 802.3 10Base-T compliant</p><p>802.1q VLAN tagging</p><p>Interrupt Moderation</p><p>TCP Segmentation offload and encapsulation in hardware</p><p>Checksum offloading of IP, TCP, and UDP frame</p><p>Increased connectivity while significantly reducing CPU utilization</p><p>Two LED adapter status indicators per port for link activity and speed</p><p>NIM is supported on all 4 ports</p><p>RoHS compliant</p><p>Limit</p><p>Full bandwidth performance may not be achieved with more than one adapter per PCI Host Bridge (PHB) or more than one CPU.</p><p>Attributes provided: Four 10/100/1000 RJ-45 ports</p><p>Attributes required: One available PCI-X card slot</p><p>For 8204-E8A: IBM i Power 6, 8204 (#5740)</p><p>Minimum required: 0</p><p>Maximum allowed: 32 (Initial order maximum: 32)</p><p>OS level required:</p><p>AIX 5.3 with the 5300-07 Technology Level and Service Pack 9, or later</p><p>AIX 5.3 with the 5300-08 Technology Level and Service Pack 7, or later</p><p>AIX 5.3 with the 5300-09 Technology Level and Service Pack 4, or later</p><p>AIX 5.3 with the 5300-10 Technology Level, or later</p><p>AIX 6.1 with the 6100-00 Technology Level and Service Pack 9, or later</p><p>AIX 6.1 with the 6100-01 Technology Level and Service Pack 5, or later</p><p>AIX 6.1 with the 6100-02 Technology Level and Service Pack 4, or later</p><p>AIX 6.1 with the 6100-03 Technology Level, or later</p><p>AIX Version 7.1 supported</p><p>SUSE LINUX Enterprise Server 10 SP2 for POWER Systems, or later.</p><p>SUSE LINUX Enterprise Server 11 for POWER Systems, or later.</p><p>Red Hat Enterprise Linux for POWER, Version 4.7 or later.</p><p>Red Hat Enterprise Linux for POWER, Version 5.2 or later.</p><p>Initial Order/MES/Both/Supported: Both</p><p>CSU: Yes</p><p>Return parts MES: No</p><p>Note:</p><p>Maximum of 2 allowed in CEC under AIX or Linux. System maximum of 32 under AIX or Linux. Not supported under IBM i.</p><p>Assignment to the VIOS requires VIOS 2.1.1.0 or later
