IBM i Power 6, 8204 (#1954) 4-Port 10/100/1000 Base-TX PCI-X Adapter</p><p>The 4-Port 10/100/1000 Base -TX PCI-X adapter is a full height PCI-X 1.0a Ethernet adapter which supports four Gigabit ports on a single adapter, delivers increased bandwidth for slot-constrained servers, and is designed to provide high connectivity and reliability using two integrated, dual-port Gigabit Ethernet controllers.</p><p>Four RJ-45 ports</p><p>3.3 volts, 64-bit 133 MHz with 64-bit Bus Mastering on the PCI-X bus</p><p>IEEE 802.3ab 1000Base-T compliant</p><p>IEEE 802.3u 100Base-T compliant</p><p>IEEE 802.3 10Base-T compliant</p><p>802.1q VLAN tagging</p><p>Interrupt Moderation</p><p>TCP Segmentation offload and encapsulation in hardware</p><p>Checksum offloading of IP, TCP, and UDP frame</p><p>Increased connectivity while significantly reducing CPU utilization</p><p>Two LED adapter status indicators per port for link activity and speed</p><p>NIM is supported on all 4 ports</p><p>RoHS compliant</p><p>Limit Full bandwidth performance may not be achieved with more than one adapter per PCI Host Bridge (PHB) or more than one CPU.</p><p>Attributes provided: Four 10/100/1000 RJ-45 ports</p><p>Attributes required: One available PCI-X card slot</p><p>For 8204-E8A: IBM i Power 6, 8204 (#1954)</p><p>Minimum required: 0</p><p>Maximum allowed: 50 (Initial order maximum: 0)</p><p>OS level required: AIX 5.3 with the 5300-07 Technology Level or later. AIX 6.1 or later. SUSE Linux Enterprise Server 10 SP1 for POWER Systems, or later. Red Hat Enterprise Linux for POWER, version 4.5, or later. Red Hat Enterprise Linux for POWER, version 5.1, or later.</p><p>Initial Order/MES/Both/Supported: Supported</p><p>CSU: Yes</p><p>Return parts MES: Does not apply</p><p>Note: Maximum of two allowed in CEC under AIX or Linux.</p><p>System maximum of 50 under AIX or Linux</p><p>Not supported by IBM i.
